Accessories

K2 MiniFive MK2 End – additional adapter as module support for the MiniRail MK2 system to improve module ventilation with a 5° tilt. Width: 9 cm. PU=20 pcs.

K2 MiniFive MK2 Front – additional adapter as module support for the MiniRail MK2 system to improve module ventilation with a 5° tilt. Width: 9 cm. PU=20 pcs.

K2 Buddy – Dome Profile Set 30 mm – mounting rail set for K2 Buddy installation. This set includes two BasicRail rails, each 1.30 m long, and a stiffening profile for mounting on the module frame, also 1.30 m long. The two additional BasicRail rails are essential for K2 Buddy installation. The stiffening profile is designed to stabilize and reinforce the frame structure. PU=1 pc.

K2 StairPlate Set – the K2 StairPlate allows microinverters and optimizers from SolarEdge, Huawei, and Enphase to be hooked into all K2 rails without being directly screwed onto the roof. The devices are pre-attached to the K2 StairPlate with the appropriate screws and nuts. The height of the modules and the devices used must be considered. PU=1 pc.

K2 Buddy – Dome Accessories Set – The Dome Accessories Set provides all necessary accessories and small parts to securely install the TopBox Set Snow in the K2 Dome flat roof systems. It includes, among other items, an aluminum plate that holds the snow sensor units and securely connects the BasicRails. Additionally, it contains specific module stops for precise data measurement, as well as anti-lift devices and cable managers to ensure a reliable installation. For installing the K2 Buddy in combination with the Dome 6 system, the following additional sets are required: 1000003 K2 Buddy – TopBox Set Snow, 1000097 K2 Buddy – BaseBox Set, 2003448 K2 Buddy – Dome Profile Set. PU=1 pc.

K2 BlackCover SingleRail 36 – K2 BlackCover for black covering of the rail ends of the K2 SingleRail 36 and K2 SingleRail 36 Light. Cover length: 150 mm. PU=16 pcs.

K2 TerraGrif K2MI Duo 18 – mounting accessory for the DomeClamp module clamp to create the equipotential bonding of the K2 Dome 6 mounting system or for grounding the module frames. PU=10 pcs.

K2 Climber 36/50 M12 for Dome FixPro – K2 Climber with elongated hole for mounting the K2 SingleRail or CrossRail on an M12 threaded rod, or as a connecting element between the flat roof mounting foot and the Dome FixPro. PU=1 pc.

K2 Climber 36/50 M10 for Dome FixPro – K2 Climber with elongated hole for mounting the K2 SingleRail or CrossRail on an M10 threaded rod, or as a connecting element between the flat roof mounting foot and the Dome FixPro. PU=1 pc.

K2 Climber 36/50 Set – usable as cross connector for the K2 SingleRail 36 & 50 and K2 CrossRail 36 & 48. Includes screw and nut. PU=10 pcs.

K2 RailUp Set – accessory for the K2 Basic and MultiRail systems. The RailUp Set allows module elevation with minimal material use, ensuring optimal module ventilation on trapezoidal sheet roofs. It also improves accessibility for installing power optimizers and microinverters. The set includes all screws and nuts required for installation. The RailUp Set is mounted under each module clamp and is compatible with the K2 Universal Clamp as well as standard K2 module clamps. Not compatible with the K2 AddOn. PU=1 pc.

K2 TerraGrif S – mounting accessory for creating the equipotential bonding of the K2 inlay system or for grounding the module frames. PU=10 pcs.

K2 Aluminum Adapter Plate M12 – adapter plate for threaded rod and M12 solar fasteners. Dimensions: 40x90 mm. PU=1 pc.

K2 Adapter Plate M10 for Dome FixPro – adapter plate for M10 threaded rods in combination with the Climber M10 or as an accessory for the Dome FixPro. Dimensions: 50x90 mm. PU=1 pc.

K2 L-Adapter SingleRail Set – attachment set for mounting the SingleRail on SolidHook roof hooks. Set includes: 1x L-Adapter SingleRail (2002652), aluminum EN AW-6063 T66; 1x self-locking nut M8 (2002744), stainless steel A2; 1x hammer head screw M8x20 (1002387), stainless steel A2; 1x flat round screw M10x25 (1000431), stainless steel A2; 1x lock nut M10 (1000042), stainless steel A2. PU=1 pc.

K2 Rail Connector Set SingleRail 50 – rail connector set for connecting two K2 SingleRail 50. Includes screws. PU=10 pcs.