Search
Current filter
K2 SingleRail Threaded Rod M12 – K2 SingleRail threaded rod climber set M12×300 with fiber-cement sealing washer. For mounting K2 Systems components onto timber substructures with fiber-cement roofing. PU=1 pc.
K2 TiltUp Vento Strut 679 mm – rear strut for the TiltUp Vento system. Length: 679 mm. PU=1 pc.
K2 TiltUp Vento Top Chord 1.60 m – top chord for the TiltUp Vento system. Length: 1.60 m. PU=1 pc.
K2 BasicRail 22 – 2.40 m quick-mount rail with structural verification in K2 Base. For mounting with BasicClip on trapezoidal sheet roofs or as a base rail for the K2 Dome system. Length: 2.40 m. PU=1 pc.
K2 TiltUp Vento Strut 856 mm – rear strut for the TiltUp Vento system. Length: 856 mm. PU=1 pc.
K2 TiltUp Vento Strut 446 mm – rear strut for the TiltUp Vento system. Length: 446 mm. PU=1 pc.
K2 TiltUp Vento Top Chord 1.30 m – top chord for the TiltUp Vento system. Length: 1.30 m. PU=1 pc.
K2 Connector Performa Mesh Tray – Performa mesh tray connector for item 2004054. Two connectors are required per mesh tray. Dimensions (LxWxH): 86 x 30 x 10 mm. PU=1 pc.
K2 SingleRail Threaded Rod M12 – K2 SingleRail threaded rod climber set M12×250 with fiber-cement sealing washer. For mounting K2 Systems components onto timber substructures with fiber-cement roofing. PU=1 pc.
K2 SingleRail Threaded Rod M12 – K2 SingleRail threaded rod climber set M12×200 with fiber-cement sealing washer. For mounting K2 Systems components onto timber substructures with fiber-cement roofing. PU=1 pc.
K2 TiltUp Vento Strut 1047 mm – rear strut for the TiltUp Vento system. Length: 1047 mm. PU=1 pc.
K2 SingleRail 36 – 2.40 m mounting rail with side attachment and structural verification in K2 Base. Versatile for various roof attachments. Length: 2.40 m. PU=1 pc.
K2 SingleRail Hanger Bolt M10 K2 SingleRail Hanger Bolt Climber Set M10x200 with fibre-cement seal. For fastening K2 Systems components to wooden substructures with corrugated fibre-cement roofing. PU = 1 pc.
K2 StairPlate Set – the K2 StairPlate allows microinverters and optimizers from SolarEdge, Huawei, and Enphase to be hooked into all K2 rails without being directly screwed onto the roof. The devices are pre-attached to the K2 StairPlate with the appropriate screws and nuts. The height of the modules and the devices used must be considered. PU=1 pc.
K2 D-Dome 6.10 Base Set (2250×75×77.5 mm) – pre-assembled base rail set for the D-Dome 6.10 system. Includes Dome SD, MidPlate, and Mat S. PU=1 / Packing Unit: 80
K2 SolidRail Light – 2.40 m mounting rail with structural verification in K2 Base. Versatile for various roof attachments. Length: 2.40 m. PU=1 pc.
{{.}}
{{{.}}}
