With the smart1® EASY2 Full Set CPO EMS, you can monitor and control your charging infrastructure, photovoltaic system and generation systems independently of the manufacturer.
Maintain control over up to 30 E-Mobility charging points, expandable up to 250 charging points, integrate up to 5 battery storage systems, expandable up to 25, as well as your PV system.
Maximise your self-consumption rate and reduce your energy costs with our unique smart1® EASY2 system.
Functional Scope of the smart1® EASY2 Full Set CPO EMS:
-
Dynamic load management for up to 30 AC/DC charging points — expandable up to 250 via master/slave controller combinations
-
Monitoring & control for up to 5 battery storage systems — expandable up to 25 via master/slave controller combinations
-
PV monitoring & integration (VDE 4105)
Functions in Detail:
-
Dynamic load management for up to 30 AC/DC charging points
-
Real-time load distribution for up to 30 charging points — dynamically distributes the available power across all AC and DC/HPC stations and prevents grid overload
-
Two freely selectable control points, grid connection point and supply line — each can be configured with dynamic, static or hard limits
-
Fail-safe fallback to a fixed total limit — ensures operation in the event of measurement or communication errors
-
Integrated protection mechanisms — threshold alarms and optional local load shedding via external energy meter
-
Battery monitoring & control
-
Up to 5 manufacturer-independent battery storage systems, including hybrid systems — up to 25 via master/slave
-
Unique multi-use battery controller with various control strategies:
-
Self-consumption optimisation
-
Peak shaving
-
Seasonal and weekend-dependent operating mode changes
-
SOC allocation, SOC sharing, for mixed operating modes
-
Backup reserve for emergency power, depending on the storage system
-
Extensive interfaces for connection to the grid operator and external components
-
Load shedding relay and alerts for peak shaving applications
-
Measurement via an external energy meter: S1ProMeter, S1BasicMeter, Janitza UMG
-
PV monitoring and control up to 1,000 kW included
-
Direct integration via inverter, LAN and RS485, for all common inverter manufacturers, or indirect integration via external network energy meter
-
Inverter control via ripple control receiver, dynamic reductions and zero feed-in
-
Support for dynamic electricity tariffs via the smart1 EnergyCloud, optionally available with the smart1 Portal Premium licence
A decentralised energy landscape thrives on manufacturer independence. Our energy management system is compatible with many major manufacturers.
Technical Data:
-
Wall-mounted enclosure 300x400x200
-
Protection rating: IP65, protection class: I, sheet steel, door lock type: 7 mm triangular key
-
Dimensions: 300x400x200 mm, wall-mounted installation incl. mounting brackets
-
Cable entry: 2x M16, 1x M20, 2x M25, 1x M32, 1x M40
-
Power supply: Optionally 230 V AC or 24 V DC on ready-to-connect terminals
Features:
-
EASY2 E-Mobility Controller DinRail
-
Industrial router incl. LTE antenna and 16-port RJ45 switch
-
Integrated 60 W / 24 V power supply unit with integrated 2-pole LS_B10 pre-fuse
-
12x Cat6a Keystone modules for network connection
-
Integrated temperature monitoring and earthing terminal
Service Included in the Price:
Support for the configuration of an EASY2 system for up to 2 hours.
Notes:
-
Scheduling must be arranged in advance in writing via support@smart1.eu in the form of a ticket.
-
No parameterisation of external components such as charging stations, inverters, battery storage systems, etc.
-
Any liability or warranty for this support service is excluded.
-
For scheduling, the customer must provide the following at least two weeks before commissioning:
-
IB-EASY2 checklist
-
Preconfigured devices, including IP address, settings, etc.
-
Functional network
-
All devices to be configured in the same subnet
-
Network access via the internet, especially to our EASY2 system
Product Classification:
