K2

K2 TiltUp Vento Strut 679 mm – rear strut for the TiltUp Vento system. Length: 679 mm. PU=1 pc.

K2 TiltUp Vento Top Chord 1.60 m – top chord for the TiltUp Vento system. Length: 1.60 m. PU=1 pc.

K2 BasicRail 22 – 2.40 m quick-mount rail with structural verification in K2 Base. For mounting with BasicClip on trapezoidal sheet roofs or as a base rail for the K2 Dome system. Length: 2.40 m. PU=1 pc.

K2 TiltUp Vento Strut 856 mm – rear strut for the TiltUp Vento system. Length: 856 mm. PU=1 pc.

K2 TiltUp Vento Strut 446 mm – rear strut for the TiltUp Vento system. Length: 446 mm. PU=1 pc.

K2 TiltUp Vento Top Chord 1.30 m – top chord for the TiltUp Vento system. Length: 1.30 m. PU=1 pc.

K2 Connector Performa Mesh Tray – Performa mesh tray connector for item 2004054. Two connectors are required per mesh tray. Dimensions (LxWxH): 86 x 30 x 10 mm. PU=1 pc.

K2 SingleRail Threaded Rod M12 – K2 SingleRail threaded rod climber set M12×250 with fiber-cement sealing washer. For mounting K2 Systems components onto timber substructures with fiber-cement roofing. PU=1 pc.

K2 SingleRail Threaded Rod M12 – K2 SingleRail threaded rod climber set M12×200 with fiber-cement sealing washer. For mounting K2 Systems components onto timber substructures with fiber-cement roofing. PU=1 pc.

K2 TiltUp Vento Strut 1047 mm – rear strut for the TiltUp Vento system. Length: 1047 mm. PU=1 pc.

K2 SingleRail 36 – 2.40 m mounting rail with side attachment and structural verification in K2 Base. Versatile for various roof attachments. Length: 2.40 m. PU=1 pc.

K2 SingleRail Hanger Bolt M10
K2 SingleRail Hanger Bolt Climber Set M10x200 with fibre-cement seal.
For fastening K2 Systems components to wooden substructures with corrugated fibre-cement roofing.
PU = 1 pc.

K2 StairPlate Set – the K2 StairPlate allows microinverters and optimizers from SolarEdge, Huawei, and Enphase to be hooked into all K2 rails without being directly screwed onto the roof. The devices are pre-attached to the K2 StairPlate with the appropriate screws and nuts. The height of the modules and the devices used must be considered. PU=1 pc.

K2 D-Dome 6.10 Base Set (2250×75×77.5 mm) – pre-assembled base rail set for the D-Dome 6.10 system. Includes Dome SD, MidPlate, and Mat S. PU=1 / Packing Unit: 80

K2 SolidRail Light – 2.40 m mounting rail with structural verification in K2 Base. Versatile for various roof attachments. Length: 2.40 m. PU=1 pc.

K2 Buddy – Dome Accessories Set – The Dome Accessories Set provides all necessary accessories and small parts to securely install the TopBox Set Snow in the K2 Dome flat roof systems. It includes, among other items, an aluminum plate that holds the snow sensor units and securely connects the BasicRails. Additionally, it contains specific module stops for precise data measurement, as well as anti-lift devices and cable managers to ensure a reliable installation. For installing the K2 Buddy in combination with the Dome 6 system, the following additional sets are required: 1000003 K2 Buddy – TopBox Set Snow, 1000097 K2 Buddy – BaseBox Set, 2003448 K2 Buddy – Dome Profile Set. PU=1 pc.