K2 Flat Roof Systems

K2 TiltUp Vento Top Chord 1.60 m – top chord for the TiltUp Vento system. Length: 1.60 m. PU=1 pc.

K2 TiltUp Vento Strut 856 mm – rear strut for the TiltUp Vento system. Length: 856 mm. PU=1 pc.

K2 TiltUp Vento Strut 446 mm – rear strut for the TiltUp Vento system. Length: 446 mm. PU=1 pc.

K2 TiltUp Vento Top Chord 1.30 m – top chord for the TiltUp Vento system. Length: 1.30 m. PU=1 pc.

K2 Connector Performa Mesh Tray – Performa mesh tray connector for item 2004054. Two connectors are required per mesh tray. Dimensions (LxWxH): 86 x 30 x 10 mm. PU=1 pc.

K2 TiltUp Vento Strut 1047 mm – rear strut for the TiltUp Vento system. Length: 1047 mm. PU=1 pc.

K2 D-Dome 6.10 Base Set (2250×75×77.5 mm) – pre-assembled base rail set for the D-Dome 6.10 system. Includes Dome SD, MidPlate, and Mat S. PU=1 / Packing Unit: 80

K2 S-Dome 6.10 Windbreaker – wind deflector for directing airflow at the rear side of the K2 S-Dome 6.10 system. PU=1 pc.

K2 Flat Roof Cable Routing Performa Mesh Tray 70x100x3000 – Performa mesh tray for cable routing on flat roofs. Compatible with the PVX Multimount (2003137). Dimensions (L×W×H): 3000 × 100 × 75 mm. Wire diameter: 3.9 mm. PU=1 pc.

K2 Dome FixPro S – fastening accessory for securing the K2 Dome 6 system to a mounting foot on roofs with ≤ 3° inclination. Depending on the mounting foot, a Climber M10 or M12 and an adapter plate are required separately. Suitable for module lengths 828–1325 mm. PU=1 pc.

K2 TiltUp Vento Foot – for the connection between the concrete foundation and the TiltUp Vento brace. PU=1 pc.

K2 D-Dome 6.10 Base Set – pre-assembled base rail set for the D-Dome 6.10 system for module widths from 960–1170 mm. Includes BasicRail 2.48 m, Dome SD, MidPlate, and Mat S. PU=1 pc.

K2 Dome Porter – for quick and universal accommodation of various ballast types for K2 Dome 6 systems. Dimensions: 2195×40×40 mm. Maximum permissible ballast: 108 kg (distributed across 2 mounted Dome Porters). Suitable for module lengths 1744–2150 mm. PU=1 pc.

K2 Dome Porter – for quick and universal accommodation of various ballast types for K2 Dome 6 systems. Dimensions: 1844×40×40 mm. Maximum permissible ballast: 108 kg (distributed across 2 mounted Dome Porters). Suitable for module lengths 1392–1799 mm. PU=1 pc.

K2 Dome Zero Peak – component for parallel-to-roof module elevation in the Dome Zero system. The Peak is mounted on the BasicRail using a cylinder screw and MK2. PU=1 pc.

K2 Dome Mat S 380 – Mat S support pad with shear-soft functionality for decoupling system forces and protecting the roof surface. PU=1 pc.